LM3671LC-1.2/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN PFM CONTROL TECHNIQUE |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM3671 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 1.2V |
| Output Type | Fixed |
| Max Output Current | 600mA |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 5mA |
| Output Configuration | Positive |
| Quiescent Current | 16μA |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Height | 600μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 600μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3671LC-1.2/NOPB Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. In this voltage regulator, 6 terminations are present. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. In order to save space, this harley voltage regulator is available in the 6-UFDFN package. There are 1 outputs configured on this voltage regulator 12v. On its output pins, this adjusting voltage regulator generates Fixed output. There is a switching regulator that is compatible with the Surface Mount mounting. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. This voltage regulator 12v reaches a switching frequency of 2MHz. Input voltage 2.7V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. The maximum input voltage of voltage regulator is 5.5V. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 3.6V. This DC/DC regulator belongs to the LM3671 family. Voltage of voltage regulator can be delivered at 1.2V volts. In order to operate voltage regulator, there are 6 pins that must be connected. For switching regulator maximum operation, dc to dc voltage regulator delivers 600mA A. Voltage regulator consumes 16μA A of quiescent current without being affected by outside forces. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 2.7V V. This harley voltage regulator is more efficient and stable due to its ALSO OPERATES IN PFM CONTROL TECHNIQUE feature.
LM3671LC-1.2/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
ALSO OPERATES IN PFM CONTROL TECHNIQUE
LM3671LC-1.2/NOPB Applications
There are a lot of Texas Instruments LM3671LC-1.2/NOPB Voltage Regulators applications.
- Motor controller circuits
- Special machining machine tools
- Electric water heaters
- Linear guide
- Large fire protection systems
- Plate bending machines
- Series voltage regulation circuits
- Electrical power transmission
- Driver circuits
- Correction machines
