LM3671TL-1.5/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-WFBGA, DSBGA |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM3671 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 1.5V |
| Output Type | Fixed |
| Max Output Current | 600mA |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 5mA |
| Output Configuration | Positive |
| Quiescent Current | 16μA |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Height | 675μm |
| Length | 1.5mm |
| Width | 1.2mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3671TL-1.5/NOPB Overview
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. In this voltage regulator, there are 5 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. There is a 5-WFBGA, DSBGA package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs on DC DC switching regulator. There are output pins on this DC DC switching regulator that generate Fixed output. This switching regulator is designed to fit the Surface Mount mounting system. The operating temperature should be kept at -40°C~85°C TA when the voltage regulator 12v is in operation. This DC-DC switching regulator has a switching frequency of 2MHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 2.7V. Voltage regulators' input voltage is limited to 5.5V. A regulator with this 260 peak reflow temperature is essentially indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 3.6V. As part of the LM3671 series of regulators, the voltage regulators can be found. There is a possibility that DC DC switching regulator can give voltage at 1.5V volts. To operate the voltage regulator 12v, 5 pins are required. Switching regulator has a maximum output current of 600mA A, which is sufficient to meet the requirements of operation. Without external influences, harley voltage regulator consumes 16μAA of quiescent current. In order to ensure reliable performance, a dc to dc voltage regulator's minimum supply voltage of 2.7V V is required. Adding the PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE feature improves this switching regulator's efficiency and stability.
LM3671TL-1.5/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
5 pins
PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE
LM3671TL-1.5/NOPB Applications
There are a lot of Texas Instruments LM3671TL-1.5/NOPB Voltage Regulators applications.
- Medical equipment
- Mobile phones
- Motor controller circuits
- Wide-range voltage regulation circuits
- Geothermal power
- Drilling machines
- Domestic water pumps
- Flexible manufacturing cells
- Electrical distribution systems
- Serial communication converter
