LM3671TL-1.8/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-WFBGA, DSBGA |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM3671 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 93 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 1.8V |
| Output Type | Fixed |
| Max Output Current | 600mA |
| Input Voltage-Nom | 3.6V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 5mA |
| Output Configuration | Positive |
| Quiescent Current | 16μA |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.8V |
| Height | 675μm |
| Length | 1.5mm |
| Width | 1.2mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3671TL-1.8/NOPB Overview
Using the Tape & Reel (TR) package, this voltage regulator optimizes the performance of the voltage regulator 12v. As you can see, this harley voltage regulator contains 5 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. There is a 5-WFBGA, DSBGA package available for this voltage regulator, as DC DC switching regulator is space-saving. The voltage regulator 12v has 1 outputs. There are output pins on this DC DC switching regulator that generate Fixed output. Switching regulators like this one can be mounted on the Surface Mount mounting system. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. This DC-DC switching regulator has a switching frequency of 2MHz. The maximum input voltage of this voltage regulator 12v is 5.5V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 3.6V for the purposes of operation. As part of the LM3671 series of regulators, the voltage regulators can be found. A voltage of 1.8V volts can be produced by voltage regulator. The switching regulator operation is carried out by 5 pins. For this switching regulator, it is recommended that the output voltage is at least 1.8V volts. Switching regulator has a maximum output current of 600mA A, which is sufficient to meet the requirements of operation. There is no external influence on harley voltage regulator as it consumes 16μA A of quiescent current. 2.7V V supply voltage ensures reliable performance of adjusting voltage regulator. The PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE feature adds to the efficiency and stability of this switching regulator.
LM3671TL-1.8/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
5 pins
PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE
LM3671TL-1.8/NOPB Applications
There are a lot of Texas Instruments LM3671TL-1.8/NOPB Voltage Regulators applications.
- Printing
- Hydro power
- Surge protection circuits
- Power supplies of electronic gadgets
- Automatic testing equipment
- Sensitive electronic devices
- Geothermal power
- Mobile phones
- Ball screw pair
- Motor controller circuits
