LM3671TLX-1.5/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-WFBGA, DSBGA |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM3671 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 1.5V |
| Output Type | Fixed |
| Max Output Current | 600mA |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 16μA |
| Voltage - Output (Min/Fixed) | 1.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Height | 675μm |
| Length | 1.5mm |
| Width | 1.2mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3671TLX-1.5/NOPB Overview
There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. There are 5 terminations in this voltage regulator. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 5-WFBGA, DSBGA package. 1 outputs of voltage regulator are configured. There are output pins on this DC DC switching regulator that generate Fixed output. A Surface Mount mounting is required for this switching regulator. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. This DC-DC switching regulator has a switching frequency of 2MHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.5V. The maximum input voltage of voltage regulator is 5.5V. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. For operation, switching regulator requires a nominal input voltage of 3.6V. The LM3671 family of DC/DC regulators includes this DC/DC regulator. A voltage of 1.5V volts can be generated by DC DC switching regulator. The switching regulator operation is carried out by 5 pins. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 600mA A. An external factor does not affect harley voltage regulator's ability to consume 16μA A of quiescent current. Switching regulators with PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE features are highly efficient and stable.
LM3671TLX-1.5/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
5 pins
PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE
LM3671TLX-1.5/NOPB Applications
There are a lot of Texas Instruments LM3671TLX-1.5/NOPB Voltage Regulators applications.
- Various precision measuring instruments
- Sink circuits
- Remotely powered electric motors
- Automation technology
- Program control systems
- Medical equipment
- Power supplies of electronic gadgets
- Network technology
- Radio equipment
- Current source circuits
