LM3671TLX-2.5/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-WFBGA, DSBGA |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM3671 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 2.5V |
| Output Type | Fixed |
| Max Output Current | 600mA |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 16μA |
| Voltage - Output (Min/Fixed) | 2.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Height | 675μm |
| Length | 1.5mm |
| Width | 1.2mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3671TLX-2.5/NOPB Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. As you can see, this harley voltage regulator contains 5 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. In order to save space, this harley voltage regulator is available in the 5-WFBGA, DSBGA package. The voltage regulator 12v has 1 outputs. Adjusting voltage regulator's output pins generate Fixed output. A Surface Mount mounting is required for this switching regulator. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. This voltage regulator 12v reaches a switching frequency of 2MHz. Despite its low input voltage, this voltage regulator can operate. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 2.5V. There is a voltage regulator maximum input voltage of 5.5V. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. For operation, voltage regulator provides a nominal input voltage of 3.6V. In this case, the DC/DC regulator belongs to the family LM3671. Voltage can be produced at 2.5V volts by voltage regulator. In order to operate voltage regulator, 5 pins are required. The maximum output current reaches 600mA A to meet the switching regulator operation requirements. Voltage regulator consumes 16μA A of quiescent current without being affected by outside forces. The PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE feature adds to the efficiency and stability of this switching regulator.
LM3671TLX-2.5/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
5 pins
PULSE FREQUENCY MODULATION TECHNIQUE IS ALSO POSSIBLE
LM3671TLX-2.5/NOPB Applications
There are a lot of Texas Instruments LM3671TLX-2.5/NOPB Voltage Regulators applications.
- Medical equipment
- Electrical power transmission
- Solar power plants
- Photovoltaic power
- Various precision measuring detectors
- Automatic plug-in machines
- Emergency lighting monitoring equipment
- Terrestrial set-top boxes
- Automatic testing equipment
- Mobile phones
