LM3674MF-1.8/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM3674 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.8V |
| Output Type | Fixed |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 5mA |
| Output Configuration | Positive |
| Quiescent Current | 300μA |
| Voltage - Output (Min/Fixed) | 1.8V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3674MF-1.8/NOPB Overview
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. A voltage regulator consists of 5 terminations. This regulator voltage is equipped with a type of analog integrated circuit that is called a SWITCHING REGULATOR voltage regulator. For space-saving purposes, this voltage regulator is available in the SC-74A, SOT-753 package. There are 1 outputs configured on this voltage regulator 12v. Adjusting voltage regulator's output pins generate Fixed output. The voltage regulator 12v fits the Surface Mount mounting hole. Operating at -30°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. In this voltage regulator 12v, the switching frequency is 2MHz. A dc to dc voltage regulator's minimum input voltage of 2.7V is required for this voltage regulator to operate. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to 1.8V. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 3.6V. DC/DC regulators such as this one belong to the LM3674 family of products. There is a possibility that DC DC switching regulator can give voltage at 1.8V volts. In order to operate voltage regulator, there are 5 pins that must be connected. A maximum output current of 600mA A is available to meet the switching regulator operation requirements. Switching regulators such as this operate from voltages of 5.5V. Voltage regulator consumes 300μA A of quiescent current without being affected by outside forces. 2.7V V supply voltage ensures reliable performance of adjusting voltage regulator.
LM3674MF-1.8/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
5 pins
Operating supply voltage of 5.5V
LM3674MF-1.8/NOPB Applications
There are a lot of Texas Instruments LM3674MF-1.8/NOPB Voltage Regulators applications.
- ATMs
- Direct power supply system
- Balance equipment
- Packaging
- Sink circuits
- Sensitive electronic devices
- Access control systems
- Grinders
- Smoke prevention equipment
- Serial communication converter
