LM3676SD-ADJ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM3676 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 93 % |
| Output Voltage | 3.3V |
| Output Type | Adjustable |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.9V |
| Input Voltage-Nom | 3.6V |
| Min Supply Voltage | 2.9V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 5mA |
| Output Configuration | Positive |
| Quiescent Current | 16μA |
| Voltage - Output (Min/Fixed) | 1.1V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Voltage - Output (Max) | 3.3V |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3676SD-ADJ/NOPB Overview
As a result of the use of the Tape & Reel (TR) package, the performance of this voltage regulator is optimized. In this voltage regulator, there are a total of 8 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. In order to save space, this harley voltage regulator is available in the 8-WFDFN Exposed Pad package. DC DC switching regulator is configured with 1 outputs. ICs such as this voltage regulator are capable of generating Adjustable outputs through their output pins. This switching regulator is designed to fit the Surface Mount mounting system. During switching regulator operation, the operating temperature should remain at -30°C~85°C TA. DC-DC switching regulators reach 2MHz switching frequencies. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. The output voltage (Min/Fixed) of this voltage regulator 12v is 1.1V. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. Voltage regulator is designed to provide a nominal input voltage of 3.6V to meet the operation requirements. As a member of the LM3676 family of DC/DC regulators, this is a DC/DC regulator. Voltage of voltage regulator can be delivered at 3.3V volts. To operate the voltage regulator 12v, 8 pins are required. For switching regulator maximum operation, dc to dc voltage regulator delivers 600mA A. On the basis of the maximum output voltage of 3.3V, adjusting voltage regulator can be operated easily. With a supply voltage of 5.5V, this harley voltage regulator works. Without external influences, harley voltage regulator consumes 16μAA of quiescent current. In this case, a dc to dc voltage regulator's minimum supply voltage of 2.9V volts is required to ensure reliable performance.
LM3676SD-ADJ/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 5.5V
LM3676SD-ADJ/NOPB Applications
There are a lot of Texas Instruments LM3676SD-ADJ/NOPB Voltage Regulators applications.
- Wide-range voltage regulation circuits
- Overvoltage protection circuits in TV sets
- Flexible manufacturing cells
- Medical monitoring systems
- Injection molding machinery
- Domestic water pumps
- Drilling machines
- Solar power plants
- Pipe bending machines
- Surge protection circuits
