LM3691TL-1.5/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, DSBGA |
| Number of Pins | 6 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM3691 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Output Voltage | 1.5V |
| Output Type | Fixed |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.3V |
| Input Voltage-Nom | 3.6V |
| Min Supply Voltage | 2.3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 5mA |
| Output Configuration | Positive |
| Quiescent Current | 64μA |
| Max Output Voltage | 3.3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 4MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.5V |
| Height | 675μm |
| Length | 1.5mm |
| Width | 1.3mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3691TL-1.5/NOPB Overview
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. Throughout this voltage regulator, there are 6 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The space-saving 6-WFBGA, DSBGA package is available for this voltage regulator. DC DC switching regulator is configured with 1 outputs. As you can see, this DC DC switching regulator generates Fixed output on its output pins. There is a switching regulator that is compatible with the Surface Mount mounting. As long as its operating temperature is -30°C~85°C TA, dc to dc voltage regulator should perform well. 4MHz is the switching frequency of this DC-DC switching regulator. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 2.3V. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. An input voltage of 3.6V is required to meet the requirements of the switching regulator operation. As a member of the LM3691 family of DC/DC regulators, this is a DC/DC regulator. At 1.5V volts, voltage regulator can provide voltage. The switching regulator operation of the system is controlled by 6 pins. There should be at least a 1.5V volt output voltage for this switching regulator in order to make it work properly. A maximum output current of 1A A is available to meet the switching regulator operation requirements. With a maximum output voltage of 3.3V, DC DC switching regulator has a very high efficiency. DC-DC switching regulator with 5.5V supply voltage. An external factor does not affect harley voltage regulator's ability to consume 64μA A of quiescent current. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 2.3V V.
LM3691TL-1.5/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
Operating supply voltage of 5.5V
LM3691TL-1.5/NOPB Applications
There are a lot of Texas Instruments LM3691TL-1.5/NOPB Voltage Regulators applications.
- Digital display device
- Industrial controllers
- Wind power
- Computer monitoring equipment of building
- Wide-range voltage regulation circuits
- Balance equipment
- Digital precision reference circuits
- Gear/thread machining machines
- Post equipment
- Power supplies of electronic gadgets
