LM3710XQMM-308
| Parameters | |
|---|---|
| Nominal Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 28μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 3.06V |
| Max Reset Threshold Voltage | 3.1V |
| Undervoltage Threshold | 3.06V |
| Overvoltage Threshold | 3.1V |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM3710 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 10 |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 28μA |
LM3710XQMM-308 Overview
There are 10 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tape & Reel (TR). To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 2 channels. The purpose of this IC power is to provide you with a reference of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Packages are specified to have an average peak reflow temperature of 260. IC management conducts at a voltage of 1.2V. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 10. The pins of the power management system count 10. It is recommended that Vsup should not be less than 1V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~85°C TJ. Power management has an output of Push-Pull, Totem Pole during operation. Supplied with a operating current of 28μA, this PMIC is capable of fully function as specified. You can always use LM3710, the base supervisor number, to search for similar PMICs of the manufacturer.
LM3710XQMM-308 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
28μA operating supply current
LM3710XQMM-308 Applications
There are a lot of Texas Instruments LM3710XQMM-308 Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Consumer electronics
- Leakage protection
- Sensitive sensors
- Battery cars
- DSP
- Dash board
- Telecommunications equipment
- Important electronics for automotive protection
- Medical-specific isolation transformer
