LM3710XQMM-308/NOPB
| Parameters | |
|---|---|
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM3710 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 10 |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 28μA |
| Nominal Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 28μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 3.06V |
| Max Reset Threshold Voltage | 3.1V |
| Threshold Voltage | 3.08 |
| Undervoltage Threshold | 3.06V |
| Overvoltage Threshold | 3.1V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
LM3710XQMM-308/NOPB Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 10 in total. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. This power managment ic consists of 2 channels, each of which can be used independently. Please find attached 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 1.2V supply voltage, the power management conducts. IC management conducts in a 1-voltage supply. Surface Mount mounts IC management. There is a subcategory called Power Management Circuits for this power management. There are a total of 10 pins on power management. 10 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TJ degrees. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 28μA. To find similar IC managements from the manufacturer, you can always search by LM3710.
LM3710XQMM-308/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
28μA operating supply current
LM3710XQMM-308/NOPB Applications
There are a lot of Texas Instruments LM3710XQMM-308/NOPB Voltage Supervisors applications.
- Fire equipment power monitoring system
- Set top box
- Battery cars
- Rechargeable batteries
- Detection of phase imbalance
- Leakage current detection
- Kitchen appliances
- Urban rail transit weak current power monitoring
- Battery cars
- Solar power charger
