LM3710YQMM-232/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM3710 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 28μA |
| Nominal Supply Current | 50μA |
| Adjustable Threshold | NO |
| Quiescent Current | 28μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.32V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 2.3V |
| Max Reset Threshold Voltage | 2.33V |
| Threshold Voltage | 3.08 |
| Undervoltage Threshold | 2.3V |
| Overvoltage Threshold | 2.33V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3710YQMM-232/NOPB Overview
Power management is mounted through 10 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. A series of 2 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 1.2V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 10 pins. Power managment ic pin count is 10. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TJ. Power management has an output of Open Drain or Open Collector during operation. As far as the supply current of the power management is concerned, it is 28μA. For similar manage ics search of the manufacturer, you can always refer to LM3710, the base PMIC number.
LM3710YQMM-232/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
28μA operating supply current
LM3710YQMM-232/NOPB Applications
There are a lot of Texas Instruments LM3710YQMM-232/NOPB Voltage Supervisors applications.
- Battery-powered equipment
- Medical-specific insulation monitor
- Medical-specific isolation transformer
- WiFi router
- Set top box
- Embedded computing
- Utility meter
- Rechargeable batteries
- Electrical fire monitoring system
- Important electronics for automotive safety
