banner_page

LM3724EM5-4.63/NOPB

5V5 Terminals 5-Pin LM3724 Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LM3724EM5-4.63/NOPB
  • Package: SC-74A, SOT-753
  • Datasheet: -
  • Stock: 626
  • Description: 5V5 Terminals 5-Pin LM3724 Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Watchdog Timer No
Reset Active Low
Voltage - Threshold 4.63V
Number of Voltages Monitored 1
Reset Timeout 100ms Minimum
Min Reset Threshold Voltage 4.54V
Max Reset Threshold Voltage 4.72V
Threshold Voltage +4.63V
Undervoltage Threshold 4.54V
Overvoltage Threshold 4.72V
Height 1.45mm
Length 2.9mm
Width 1.6mm
Thickness 1.2mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 320mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number LM3724
Output Open Drain or Open Collector
Pin Count 5
Power Supplies 5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 15μA
Nominal Supply Current 15μA
Power Dissipation 320mW
Output Current 20mA
Max Supply Current 15μA
Adjustable Threshold NO
Quiescent Current 6μA

LM3724EM5-4.63/NOPB Overview


A total of 5 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 5V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. This power management system has 5 pins. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a supply current of 15μA for the power management. It is always advisable to use LM3724, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 5V volts of power. Voltage supervisor can work with a supply temperature of 15μA at the most.

LM3724EM5-4.63/NOPB Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current

LM3724EM5-4.63/NOPB Applications


There are a lot of Texas Instruments LM3724EM5-4.63/NOPB Voltage Supervisors applications.

  • Important electronics for automotive safety
  • Power distribution systems of operating room
  • Magnetic resonance imaging
  • Cloud computing
  • Efficient information transmission
  • Detection of phase sequence
  • emergency room
  • Digitally controlled LDO regulators circuit
  • Multi-voltage system
  • Military electronics

Write a review

Note: HTML is not translated!
    Bad           Good