Parameters |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
320mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
LM3724 |
Output |
Open Drain or Open Collector |
Pin Count |
5 |
Max Output Current |
20mA |
Power Supplies |
3.3V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
8μA |
Nominal Supply Current |
10μA |
Power Dissipation |
320mW |
Output Current |
20mA |
Max Supply Current |
10μA |
Adjustable Threshold |
NO |
Quiescent Current |
6μA |
Watchdog Timer |
No |
Reset |
Active Low |
Number of Voltages Monitored |
1 |
Reset Timeout |
100ms Minimum |
Min Reset Threshold Voltage |
3.03V |
Max Reset Threshold Voltage |
3.14V |
Threshold Voltage |
+3.08V |
Undervoltage Threshold |
3.03V |
Overvoltage Threshold |
3.08V |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
LM3724IM5-3.08/NOPB Overview
A total of 5 terminals are used to mount this power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. There are a total of 5 pins on power management. This power management has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a 8μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using LM3724, the base power ics number. It is necessary to have 3.3V volts of power in order for this voltage supervisor to operate. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 10μA.
LM3724IM5-3.08/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
8μA operating supply current
LM3724IM5-3.08/NOPB Applications
There are a lot of Texas Instruments LM3724IM5-3.08/NOPB Voltage Supervisors applications.
- Important electronics for automotive protection
- Detection of phase sequence
- Automotive permanent magnet synchronous motors
- Utility meter
- Radar
- Kitchen appliances
- Military electronics
- Consumer electronics
- Medical-specific insulation monitor
- Set top box