LM3743MM-300/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OUTPUT VOLTAGE ADJUSTABLE DOWN TO 0.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 300kHz |
| Base Part Number | LM3743 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4.6V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.8mA |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Quiescent Current | 1.8mA |
| Control Features | Current Limit, Enable, Soft Start, Tracking |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Duty Cycle | 91 % |
| Isolation | Non-Isolated |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3743MM-300/NOPB Overview
With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The program can handle Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 3V~5.5V. Suitable for work in a -40°C~125°C TJ dc switcher. dc dc regulator can be generalized using Surface Mount. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Soft Start, Tracking. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of terminations with 10 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 3.3V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "LM3743". Pins number 10 of switching converter in total. The minimum input voltage of the dc dc voltage regulator should be 3V. Statistically, DC regulator outputs 4.6V volts. A starting point for a project is to note down the dc dc regulator's usual output current, which is 20A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 91 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. A frequency of 300kHz is set for the switching controller. DC to DC voltage regulator has a value of OUTPUT VOLTAGE ADJUSTABLE DOWN TO 0.8V to better satisfy the need. To run the voltage regulator dc to dc safely and reliably, users should apply 5V to the voltage regulator dc to dc. In a dormant state, the dc switching uses 1.8mA. The supply current of the voltage controller is 1.8mA. Phases of this controller are 1.
LM3743MM-300/NOPB Features
Transistor Driver Outputs
Current Limit, Enable, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 91 %
Frequency: 300kHz
OUTPUT VOLTAGE ADJUSTABLE DOWN TO 0.8V
LM3743MM-300/NOPB Applications
There are a lot of Texas Instruments LM3743MM-300/NOPB DC to DC converter applications.
- Planers
- USB circuits
- Large fire protection systems
- Textile machinery
- Computer rooms
- Driver circuits
- Injection molding machinery
- Current source circuits
- Magnetohydrodynamic power
- Smoke prevention equipment
