LM392M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Amplifier, Comparator |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Applications | Transducer Amplifier |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM392 |
| Pin Count | 8 |
| Operating Supply Voltage | 16V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 32V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 530mW |
| Output Current | 16mA |
| Response Time | 1.3 μs |
| Slew Rate | 0.1 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Common Mode Rejection Ratio | 65 dB |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Min Dual Supply Voltage | 1.5V |
| Bias Current-Max (IIB) @25C | 0.4μA |
| Programmable Power | NO |
| Input Bias Current | 250nA |
| Input Offset Current-Max (IIO) | 0.15μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM392M Overview
To house this device, a Tube-package is used that is integrated within the device.It's an excellent Amplifier, Comparator at an excellent price.The 8-SOIC (0.154, 3.90mm Width) package contains this item.A mounting process is involved, which involves mounting the part in the Surface Mount direction.Transducer Amplifier is the most common place where it is used.In this device, LM392 represents the base part number.The 2 function is used here to access high performance for amplification.8 terminals are in total there, which each have their own function that they perform.In order to obtain a peak relow for a part, the iron temperature should be controlled under 235 when performing the peak relow.As a result, there are a total of 8 pins on the part.In order for this amplifier to operate efficiently, a supply voltage of 5V is recommended.8-pin amplifier for custom applications.There is a minimum temperature at which the device can operate, which is as low as 0°C.The fact that this part is capable of running at temperatures as high as 70°C is impressive.In order to enhance this product's design flexibility, Surface Mount is embedded.It has fantastic amplifying capabilities just like any high-quality Operational Amplifier.As far as supply voltage is concerned, it is rated at 32V maximum.At least 3V powers are supplied.The device can be supplied using 16V.
LM392M Features
LM392M Applications
There are a lot of Texas Instruments LM392M Special Purpose Amplifiers applications.
- Precision measurement
- Tablets
- Car stereo
- Measurements of Wheatstone bridge
- Medical imaging
- High-frequency data acquisition systems
- High speed sample
- Comparator
- Power generator
- Portable media players
