LM393AD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 830mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 830mW |
| Output Current | 18mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 100nA |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 2mV @ 30V |
| Current - Input Bias (Max) | 0.1μA @ 5V |
| Current - Output (Typ) | 18mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393AD Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.There is a CMOS, DTL, ECL, MOS, Open-Collector, TTL output type for this comparator.We ship the part through Tube .Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a part of Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.The type of the chip can be classified as General Purpose .There are a total of 2 elements in it.The device contains 8 pins.The type of mounting recommended is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .There are 8 pins on the comparator.You may wish to search LM393 for more solutions that address your specific needs.There is a quiescent current of 2.5mA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 1mA .A current supply greater than 1mA may result in the comparator malfunctioning.In order to run the device, there are only 5V power supplies required.You are allowed to input a maximum current of 100nA into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .
LM393AD Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393AD Applications
There are a lot of STMicroelectronics LM393AD linear comparators applications.
- Body Control Modules
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Metering Systems
- Appliances
- Simple Analog-to-Digital Converters (ADCs)
- Mobile Phones and Tablets
- Lithium ion battery monitoring
- Point of load regulators
- Laptop Computers
