Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
LM393 |
Pin Count |
8 |
Output Type |
CMOS, MOS, Open-Drain, TTL |
Operating Supply Voltage |
28V |
Number of Elements |
2 |
Power Supplies |
5/30V |
Nominal Supply Current |
1mA |
Output Current |
20mA |
Max Supply Current |
500μA |
Quiescent Current |
2.5mA |
Response Time |
300 ns |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
2mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.05μA |
Supply Voltage Limit-Max |
36V |
Dual Supply Voltage |
9V |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
2mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM393ADG4 Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.Output type CMOS, MOS, Open-Drain, TTL is used for this comparator.The part will be shipped by Tube .As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a Differential chip.The total number of elements is 2 .The device contains 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching LM393 .The comparator displays a quiescent current of 2.5mA .A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 1mA in order to use the device normally.The compartator could be damaged if the current supply exceeds 500μA .There is sufficient power to run the device from 5/30V power supplies.In accordance with the voltage formula, the part's voltage gain is 106.02dB .In order to operate normally, a supply voltage of 0 is required.
LM393ADG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393ADG4 Applications
There are a lot of Texas Instruments LM393ADG4 linear comparators applications.
- Battery management and protection
- DC/DC and AC/DC power supplies
- Automotive
- Infotainment & cluster
- Appliances
- Wide Range VCO; MOS Clock Timers
- RC Timers
- Factory automation & control
- Ultra-Low Power Systems
- Metering Systems