Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Weight |
18.99418mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Differential |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
LM393 |
Pin Count |
8 |
Output Type |
CMOS, MOS, Open-Drain, TTL |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
1mA |
Output Current |
20mA |
Max Supply Current |
500μA |
Quiescent Current |
2.5mA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
2mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.05μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
2mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM393ADGKR Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with a CMOS, MOS, Open-Drain, TTL output is used here.This chip is designed with the Tape & Reel (TR) package.The comparator has 8 terminals.Other Comparator like the device play a important role in the industry.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.This is a typical comparator of type Differential .Electronic comparator has a total of 2 elements.As a result, it contains 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .8 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM393 .The comparator displays a quiescent current of 2.5mA .The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current for the device be set to 1mA .If the current supply exceeds 500μA , the comparator could malfunction.In order to operate the device, 5V power supplies are sufficient.You can input a maximum current of 250nA into this device.The voltage gain of the part is indicated by 106.02dB in the voltage formula.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LM393ADGKR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393ADGKR Applications
There are a lot of Texas Instruments LM393ADGKR linear comparators applications.
- Window Comparators
- Infotainment and Clusters
- Pulse, Squarewave, and Time Delay Generators
- Motor drives
- Notebooks and PDAs
- Set Top Boxes
- Multivibrators and High-Voltage Digital Logic Gates
- Threshold Detectors
- Power management
- Zero-Crossing Detectors