LM393ADRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5/30V |
| Nominal Supply Current | 1mA |
| Output Current | 6mA |
| Max Supply Current | 1mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 2mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 20mA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393ADRE4 Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, MOS, Open-Drain, TTL output on this device.This chip is designed with the Tape & Reel (TR) package.8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.This is a typical comparator of type Differential .There are a total of 2 elements in it.The device contains 8 pins.The type of mounting recommended is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .This comparator has 8 pins.Search LM393 to find more pin-to-pin solutions.The PCB or other board has a Surface Mount for mounting.The nominal supply current of the device should be 1mA for normal use.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1mA .Electronic comparator is sufficient to run the device wElectronic comparatorh 5/30V power supplies.According to the voltage formula, the part has a voltage gain of 106.02dB .Packed in TR , this device is for general uses (often in ADC circuits).
LM393ADRE4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Voltage Gain: 106.02dB
LM393ADRE4 Applications
There are a lot of Texas Instruments LM393ADRE4 linear comparators applications.
- Ultra-Low Power Systems
- Battery-Powered Electronics
- Automotive
- Battery-Powered Electronics
- Lithium ion battery monitoring
- Wearable Devices
- Wireless Base Stations
- Pulse, Squarewave, and Time Delay Generators
- Mobile Phones
- Current and voltage sensing
