LM393ADRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5/30V |
| Nominal Supply Current | 500μA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 2mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393ADRG4 Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, MOS, Open-Drain, TTL .As a result, it is designed with Tape & Reel (TR) package.You can find 8 terminals of the comparator.The electrical component here belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.It's a typical Differential comparator.A total of 2 elements can be found in it.The pinout of the component starts from 8 pins it has.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM393 .There is 2.5mA current flowing in this comparator.There is a Surface Mount for mounting it on a PCB or other board.The nominal supply current of the device should be 500μA for normal use.A supply current exceeding 500μA may result in the comparator malfunctioning.The device can be run with 5/30V power supplies.Electronic comparator is possible to input up to 250nA current into the device.Based on the voltage formula, the voltage gain of the part is 106.02dB .With a TR package, this device is designed for general use (usually in ADC circuits).
LM393ADRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393ADRG4 Applications
There are a lot of Texas Instruments LM393ADRG4 linear comparators applications.
- Building automation
- Simple Analog-to-Digital Converters (ADCs)
- Mobile Communications
- Wireless Base Stations
- System control and monitoring
- Alarm and Monitoring Circuits
- General-Purpose Portable Devices
- Power Supervision
- Mobile Phones
- Ultra-Low Power Systems
