LM393AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.5W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Nominal Supply Current | 1mA |
| Power Dissipation | 1.5W |
| Output Current | 18mA |
| Max Supply Current | -5mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 100nA |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 2mV @ 30V |
| Current - Input Bias (Max) | 0.1μA @ 5V |
| Natural Thermal Resistance | 85 °C/W |
| Current - Output (Typ) | 18mA @ 5V |
| Height Seated (Max) | 5.33mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393AN Overview
A convenient transport package is provided in 8-DIP (0.300, 7.62mm) .A comparator with a CMOS, DTL, ECL, MOS, Open-Collector, TTL output is used here.The part will be shipped by Tube .There are8 terminals on the comparator.Electronic comparator is a part of Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical General Purpose comparator.Electronic comparator consists of 2 elements in total.A total of 8 pins are included.Through Hole universial mout for easy adapting.The operating temperature should be set to 0°C~70°C to avoid mal-function.Electronic comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching LM393 .There is a quiescent current of 2.5mA in this comparator.The board has a Through Hole for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 1mA .A supply current exceeding -5mA may result in the comparator malfunctioning.There is sufficient power to run the device from 5V power supplies.The maximal current your can input into the device is 100nA .According to the voltage formula, the part has a voltage gain of 106.02dB .The output quality is maintained by the cooperation of 4 channels.
LM393AN Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393AN Applications
There are a lot of STMicroelectronics LM393AN linear comparators applications.
- Ultra-Low Power Systems
- Wide Range VCO; MOS Clock Timers
- High-Speed Differential Line Receiver
- Body Control Modules
- Mobile Phones and Tablets
- General-Purpose, Low-Voltage Applications
- Alarm and Monitoring Circuits
- Multivibrators and High-Voltage Digital Logic Gates
- Zero-Crossing Detectors
- Consumer Medical Electronics
