Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
8 |
Weight |
39.008944mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Differential |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
LM393 |
Pin Count |
8 |
Output Type |
CMOS, MOS, Open-Drain, TTL |
Operating Supply Voltage |
28V |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
1mA |
Output Current |
20mA |
Max Supply Current |
500μA |
Quiescent Current |
2.5mA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
2mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.05μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Dual Supply Voltage |
9V |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
2mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM393APWR Overview
For convenience, it is packaged in 8-TSSOP (0.173, 4.40mm Width) .The comparator has a CMOS, MOS, Open-Drain, TTL output.Ready for shipping in Tape & Reel (TR) package.The comparator has 8 terminals.The electrical component in this case belongs to the Comparator families.A comparator supplied with 5V voltage can complete many demanding tasks.The type of the chip can be classified as Differential .There are a total of 2 elements in it.The device includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.8 pins are available on the comparator.You can search LM393 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 2.5mA .The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current for the device be set to 1mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 500μA .The device can be operated with 5V power supplies.The maximal current your can input into the device is 250nA .From the voltage formula, the voltage gain of the part is 106.02dB .Comparator electronics is necessary to have a voltage of 28V for normal operation.Comparator electronics is acceptable to pack the device by TR .
LM393APWR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393APWR Applications
There are a lot of Texas Instruments LM393APWR linear comparators applications.
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Security Detection Systems
- Window Comparators
- Power management
- Notebooks and PDAs
- General-Purpose, Low-Voltage Applications
- Automotive
- High-Speed Differential Line Receiver
- Building automation