LM393DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 570mW |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LM393DG Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a CMOS, DTL, ECL, MOS, Open-Collector, TTL output.The part will be shipped by Tube .8 terminals are found on the comparator.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.It's a typical General Purpose comparator.The total number of elements is 2 .As a result, it contains 8 pins.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .This comparator has 8 pins.If you require more pin-to-pin solutions, search LM393 for more options.A quiescent current of 2.5mA is displayed by this comparator.The nominal supply current of the device should be 1mA for normal use.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 1mA .Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .
LM393DG Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393DG Applications
There are a lot of ON Semiconductor LM393DG linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- Hand-Held Electronics
- Power management
- Portable and Battery-Powered Systems
- RC Timers
- Simple Analog-to-Digital Converters (ADCs)
- Portable Battery Monitoring
- Metering Systems
- Notebooks and PDAs
- Set Top Boxes
