LM393DGKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393DGKRG4 Overview
In order to make transportation easier, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a CMOS, MOS, Open-Drain, TTL output.This device is designed in Tape & Reel (TR) case.The comparator has a total of 8 terminals.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as Differential .A total of 2 elements can be found in it.There are 8 pins on this board.Surface Mount universial mout for easy adapting.Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.This comparator has 8 pins.You can find more pin-to-pin solutions by searching LM393 .A quiescent current of 2.5mA is displayed by this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 1mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 500μA .There is sufficient power to run the device from 5V power supplies.You can input a maximum current of 250nA into this device.According to the voltage formula, the part has a voltage gain of 106.02dB .Comparator electronics is necessary to have a voltage of 28V for normal operation.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LM393DGKRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393DGKRG4 Applications
There are a lot of Texas Instruments LM393DGKRG4 linear comparators applications.
- Limit Comparators
- System control and monitoring
- Body Control Modules
- High-Speed Differential Line Receiver
- Hand-Held Electronics
- Industrial
- Window Comparators
- DC/DC and AC/DC power supplies
- Automotive
- Mobile Communications
