LM393DMR2G
| Parameters | |
|---|---|
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 570mW |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
LM393DMR2G Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Output type CMOS, DTL, ECL, MOS, Open-Collector, TTL is used for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component here belongs to the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.In general, the chip type can be classified as General Purpose .There are a total of 2 elements in it.A total of 8 pins are included.Electronic comparator is recommended that the mounting type be Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.Electronic comparator has 8 pins.If you require more pin-to-pin solutions, search LM393 for more options.There is a quiescent current of 2.5mA in this comparator.The nominal supply current of the device should be 1mA for normal use.Current supply exceeding 1mA could cause disfunction of the compartator.5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum of 250nA current into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 110dB .
LM393DMR2G Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 110dB
LM393DMR2G Applications
There are a lot of ON Semiconductor LM393DMR2G linear comparators applications.
- Window Comparators
- Pulse, Squarewave, and Time Delay Generators
- General Purpose Low Voltage Applications
- Window Comparators, Multivibrators
- General-Purpose Portable Devices
- Automatic Test Equipment
- Infotainment & cluster
- High-Speed Differential Line Receiver
- Battery-Powered Electronics
- Current and voltage sensing
