Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Differential |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
LM393 |
Pin Count |
8 |
Output Type |
CMOS, MOS, Open-Drain, TTL |
Operating Supply Voltage |
28V |
Number of Elements |
2 |
Power Supplies |
5/30V |
Nominal Supply Current |
1mA |
Output Current |
20mA |
Max Supply Current |
500μA |
Quiescent Current |
2.5mA |
Response Time |
300 ns |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.05μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Dual Supply Voltage |
9V |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
5mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM393DRG4 Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, MOS, Open-Drain, TTL output type.The chip is packaged with Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Speaking of types, this is a typical Differential comparator.The total number of elements is 2 .Electronic comparator includes 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.8 pins are available on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search LM393 .A quiescent current of 2.5mA is displayed by this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 1mA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 500μA .There is sufficient power to run the device from 5/30V power supplies.Input current to the device cannot exceed 250nA .Based on the voltage formula, the voltage gain of the part is 106.02dB .For normal operation, the operating supply voltage must be 28V .With a TR package, this device is designed for general use (usually in ADC circuits).
LM393DRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393DRG4 Applications
There are a lot of Texas Instruments LM393DRG4 linear comparators applications.
- System control and monitoring
- Automatic Test Equipment
- Power Supervision
- Body Control Modules
- Consumer Medical Electronics
- Multivibrators and High-Voltage Digital Logic Gates
- Factory automation & control
- Mobile Communications
- Infotainment and Clusters
- General-Purpose Portable Devices