LM393DT
| Parameters | |
|---|---|
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.475mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Signature |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | TIN/TIN COPPER |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
LM393DT Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.A comparator with a CMOS, MOS, Open-Collector, TTL output is used here.Ready for shipping in Tape & Reel (TR) package.Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparator families.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.A comparator of this type is typically of type General Purpose .The total number of elements is 2 .The pinout of the component starts from 8 pins it has.A Surface Mount mounting type is recommended.The operating temperature should be set to 0°C~70°C to avoid mal-function.The comparator has a pin count of 8 .You may wish to search LM393 for more solutions that address your specific needs.A quiescent current of 2.5mA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current for the device be set to 1mA .If the current supply exceeds 1mA , the comparator might be damaged.The device can be run with 5V power supplies.A maximum current of 250nA can be supplied to the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .The part is from Signature comparator series.
LM393DT Features
CMOS, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393DT Applications
There are a lot of ROHM Semiconductor LM393DT linear comparators applications.
- Window Comparators
- Pulse, Squarewave, and Time Delay Generators
- Lithium ion battery monitoring
- Alarm and Monitoring Circuits
- Motor drives
- Infotainment and Clusters
- Limit Comparators
- Simple Analog-to-Digital Converters (ADCs)
- Zero-Crossing Detectors
- Industrial
