LM393M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 510mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 1mA |
| Power Dissipation | 510mW |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Propagation Delay | 700 ns |
| Quiescent Current | 2.5mA |
| Response Time | 1300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LM393M Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.Output type of this comparator is CMOS, DTL, ECL, MOS, Open-Collector, TTL .As a result, it is designed with Tube package.Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type General Purpose .The device is equipped with 8 pins.A Surface Mount mounting type is recommended.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator is equipped with 8 pins.You can find more pin-to-pin solutions for your special requirements by searching LM393 .As a result, this comparator displays a quiescent current of 2.5mA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires a nominal supply current of 1mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 1mA .A power supply of 5V is sufficient for the operation of the device.Electronic comparator is possible to input a maximum current of 250nA into the device.Based on the voltage formula, the voltage gain of the part is 106.02dB .
LM393M Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393M Applications
There are a lot of Texas Instruments LM393M linear comparators applications.
- Security Detection Systems
- Threshold Detectors
- DC/DC and AC/DC power supplies
- Wide Range VCO; MOS Clock Timers
- Appliances
- Handheld Instruments
- General-Purpose Portable Devices
- Power Supervision
- Consumer Medical Electronics
- Hand-Held Electronics
