banner_page

LM393M/NOPB

Surface Mount Tube 16mA mA 1300 ns μs Linear Comparators 106.02dB dB 250nA pA 400μA μA 1mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LM393M/NOPB
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 419
  • Description: Surface Mount Tube 16mA mA 1300 ns μs Linear Comparators 106.02dB dB 250nA pA 400μA μA 1mV mV Surface Mount (Kg)

Details

Tags

Parameters
Propagation Delay 700 ns
Quiescent Current 2.5mA
Turn On Delay Time 400 ns
Response Time 1300 ns
Voltage - Supply, Single/Dual (±) 2V~36V ±1V~18V
Input Offset Voltage (Vos) 1mV
Voltage Gain 106.02dB
Supply Voltage Limit-Max 36V
Max Input Current 250nA
Dual Supply Voltage 9V
Input Bias Current 250nA
Current - Quiescent (Max) 2.5mA
Max Junction Temperature (Tj) 70°C
Voltage - Input Offset (Max) 5mV @ 30V
Current - Input Bias (Max) 0.25μA @ 5V
Current - Output (Typ) 16mA @ 5V
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Termination SMD/SMT
ECCN Code EAR99
Type General Purpose
Terminal Finish Matte Tin (Sn)
Subcategory Comparator
Max Power Dissipation 510mW
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number LM393
Pin Count 8
Output Type CMOS, DTL, ECL, MOS, Open-Collector, TTL
Operating Supply Voltage 28V
Power Supplies 5V
Number of Circuits 2
Nominal Supply Current 400μA
Power Dissipation 510mW
Output Current 16mA
Max Supply Current 200μA

LM393M/NOPB Overview


A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .Output type CMOS, DTL, ECL, MOS, Open-Collector, TTL is used for this comparator.The chip is packaged with Tube .8 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In terms of type, this is a typical General Purpose comparator.The device includes 8 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM393 .This comparator presents a quiescent current of 2.5mA .There is a Surface Mount for mounting it on a PCB or other board.For normal use of the device, the nominal supply current should be 400μA .A current supply greater than 200μA may cause the comparator to malfunction.5V power supplies are enough to run the device.A maximum current of 250nA can be supplied to the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .For normal operation, the operating supply voltage must be 28V .

LM393M/NOPB Features


CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

LM393M/NOPB Applications


There are a lot of Texas Instruments LM393M/NOPB linear comparators applications.

  • Building automation
  • Portable and Battery-Powered Systems
  • Portable Battery Monitoring
  • Automatic Test Equipment
  • Power Supervision
  • Laptop Computers
  • Window Comparators, Multivibrators
  • Automotive
  • High-Speed Sampling Circuits
  • Factory automation & control

Write a review

Note: HTML is not translated!
    Bad           Good