LM393MX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 510mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Current Rating | 16A |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 510mW |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Propagation Delay | 700 ns |
| Quiescent Current | 2.5mA |
| Response Time | 1300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LM393MX Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, DTL, ECL, MOS, Open-Collector, TTL .Ready for shipping in Tape & Reel (TR) package.Electronic comparator is possible to find the 8 terminals of the comparator.The chip belongs to Comparator .Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.This is a typical comparator of type General Purpose .The board includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.There are 8 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search LM393 .The comparator presents a quiescent current of 2.5mA volts.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires a nominal supply current of 1mA .A current supply greater than 1mA may result in the comparator malfunctioning.In order to operate the device, 5V power supplies are sufficient.Input current to the device cannot exceed 250nA .The voltage gain of the part is indicated by 106.02dB in the voltage formula.The device is acceptable to pack by TR .
LM393MX Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393MX Applications
There are a lot of Texas Instruments LM393MX linear comparators applications.
- Analog front end
- Point of load regulators
- Portable and Battery-Powered Systems
- System control and monitoring
- Battery-Powered Electronics
- DC/DC and AC/DC power supplies
- Zero-Crossing Detectors
- RC Timers
- High-Speed Sampling Circuits
- High-Speed Differential Line Receiver
