Parameters |
Max Power Dissipation |
570mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
LM393 |
Pin Count |
8 |
Output Type |
CMOS, DTL, ECL, MOS, Open-Collector, TTL |
Operating Supply Voltage |
28V |
Power Supplies |
5V |
Number of Circuits |
2 |
Nominal Supply Current |
1mA |
Power Dissipation |
570mW |
Output Current |
16mA |
Max Supply Current |
1mA |
Quiescent Current |
2.5mA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Halogen Free |
Halogen Free |
Output Current per Channel |
100pA |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.4μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Dual Supply Voltage |
9V |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
5mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Current - Output (Typ) |
16mA @ 5V |
Nominal Supply Voltage (DC) |
18V |
Height |
3.44mm |
Length |
10.16mm |
Width |
6.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
LAST SHIPMENTS (Last Updated: 3 days ago) |
Contact Plating |
Tin |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Weight |
4.535924g |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
LM393NG Overview
In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .Output type of this comparator is CMOS, DTL, ECL, MOS, Open-Collector, TTL .This device is designed in Tube case.The comparator has 8 terminals.Electronic comparator is a part of Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as General Purpose .There are 8 pins on this board.Electronic comparator is recommended that you mount the device using type Through Hole .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .8 pins are present on the comparator.Try search LM393 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 2.5mA in this comparator.Normal operation of the device requires 1mA supply current.A current supply greater than 1mA may result in the comparator malfunctioning.In order to run the device, there are only 5V power supplies required.You are allowed to input a maximum current of 250nA into the device.Comparator electronics follows that the voltage gain of the part is 106.02dB .In order to operate normally, a supply voltage of 0 is required.
LM393NG Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393NG Applications
There are a lot of ON Semiconductor LM393NG linear comparators applications.
- Notebooks and PDAs
- Infotainment & cluster
- Motor drives
- Infotainment and Clusters
- Building automation
- Wearable Devices
- Handheld Instruments
- Mobile Communications
- Factory automation & control
- Limit Comparators