LM393N/NOPB
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 780mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 1mA |
| Power Dissipation | 780mW |
| Output Current | 16mA |
| Max Supply Current | 200μA |
| Propagation Delay | 700 ns |
| Quiescent Current | 2.5mA |
| Turn On Delay Time | 400 ns |
| Response Time | 1300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
LM393N/NOPB Overview
A convenient transport package is provided in 8-DIP (0.300, 7.62mm) .There is a comparator of type CMOS, DTL, ECL, MOS, Open-Collector, TTL output on this device.Electronic comparator is shipped by Tube .There are8 terminals on the comparator.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as General Purpose .There are 8 pins on this board.The recommended mounting method is Through Hole .The operating temperature should be set to 0°C~70°C to avoid mal-function.8 pins are available on the comparator.You can find more pin-to-pin solutions by searching LM393 .As a result, this comparator displays a quiescent current of 2.5mA .A Through Hole is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 1mA when using the device.If the current supply exceeds 200μA , the comparator could malfunction.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.Electronic comparator is possible to input up to 250nA current into the device.In accordance with the voltage formula, the part's voltage gain is 106.02dB .In order to operate normally, a supply voltage of 0 is required.
LM393N/NOPB Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393N/NOPB Applications
There are a lot of Texas Instruments LM393N/NOPB linear comparators applications.
- Automatic Test Equipment
- Motor drives
- Zero-Crossing Detectors
- General-Purpose, Low-Voltage Applications
- Wireless Base Stations
- DC/DC and AC/DC power supplies
- Hand-Held Electronics
- Building automation
- Point of load regulators
- Wearable Devices
