LM393PE3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 500μA |
| Output Current | 20mA |
| Max Supply Current | 2.5mA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393PE3 Overview
In order to facilitate transportation, it is packaged in 8-DIP (0.300, 7.62mm) .The comparator has a CMOS, MOS, Open-Drain, TTL output.Electronic comparator is shipped by Tube .The device is designed with 8 terminations.The chip belongs to Comparator .Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Electronic comparator can be classified as a Differential chip.This element consists of 2 elements in total.There are 8 pins on this board.Through Hole universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.The comparator consists of 8 pins.In order to find a solution that meets your specific needs, search LM393 for more pin-to-pin solutions.The comparator presents a quiescent current of 2.5mA volts.There is a Through Hole for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 500μA .A current supply greater than 2.5mA may result in the comparator malfunctioning.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.In accordance with the voltage formula, the part's voltage gain is 106.02dB .
LM393PE3 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393PE3 Applications
There are a lot of Texas Instruments LM393PE3 linear comparators applications.
- System control and monitoring
- Set Top Boxes
- Laptop Computers
- Pulse, Squarewave, and Time Delay Generators
- Portable Battery Monitoring
- Appliances
- General-Purpose, Low-Voltage Applications
- Window Comparators
- Window Comparators
- Multivibrators and High-Voltage Digital Logic Gates
