LM393PE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5/30V |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393PE4 Overview
The product is packaged in 8-DIP (0.300, 7.62mm) for ease of transportation.Output type of this comparator is CMOS, MOS, Open-Collector, TTL .This package has been designed with Tube .The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a Differential chip.Electronic comparator has a total of 2 elements.There are 8 pins on this board.Electronic comparator is recommended that you mount the device using type Through Hole .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .This comparator has 8 pins.Alternatively, you may search for LM393 to find more pin-to-pin solutions for your specific needs.In this comparator, the quiescent current is 2.5mA .A Through Hole is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 1mA in order to use the device normally.A current supply greater than 500μA may cause the comparator to malfunction.In order to run the device, there are only 5/30V power supplies required.Input current to the device is limited to 250nA .From the voltage formula, the voltage gain of the part is 106.02dB .
LM393PE4 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393PE4 Applications
There are a lot of Texas Instruments LM393PE4 linear comparators applications.
- General-Purpose Portable Devices
- Hand-Held Electronics
- Analog front end
- Pulse, Squarewave, and Time Delay Generators
- Mobile Phones
- High-Speed Sampling Circuits
- Battery management and protection
- Metering Systems
- Point of load regulators
- Infotainment and Clusters
