LM393PSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 8 |
| Weight | 122.611688mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393PSR Overview
A convenient packaging is provided in the form of 8-SOIC (0.209, 5.30mm Width) .The comparator has a type CMOS, MOS, Open-Drain, TTL output.The chip is packaged with Cut Tape (CT) .Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.A comparator of this type is typically of type Differential .Electronic comparator has a total of 2 elements.Electronic comparator includes 8 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.8 pins are present on the comparator.In order to find a solution that meets your specific needs, search LM393 for more pin-to-pin solutions.A quiescent current of 2.5mA is displayed by this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires a nominal supply current of 1mA .If the current supply exceeds 500μA , the comparator could malfunction.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.Electronic comparator is possible to input up to 250nA current into the device.Comparator electronics follows that the voltage gain of the part is 106.02dB .Packed in TR , this device is for general uses (often in ADC circuits).
LM393PSR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393PSR Applications
There are a lot of Texas Instruments LM393PSR linear comparators applications.
- Hand-Held Electronics
- System control and monitoring
- Appliances
- Wireless Base Stations
- General-Purpose, Low-Voltage Applications
- Security Detection Systems
- Mobile Phones and Tablets
- Simple Analog-to-Digital Converters (ADCs)
- DC/DC and AC/DC power supplies
- Battery-Powered Electronics
