Parameters |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
625mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LM393 |
Pin Count |
8 |
Output Type |
CMOS, DTL, ECL, MOS, Open-Collector, TTL |
Number of Elements |
2 |
Nominal Supply Current |
1mA |
Power Dissipation |
625mW |
Output Current |
18mA |
Max Supply Current |
1mA |
Quiescent Current |
2.5mA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Output Current per Channel |
100pA |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.4μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
5mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Natural Thermal Resistance |
120 °C/W |
Current - Output (Typ) |
18mA @ 5V |
Length |
4.4mm |
Width |
3mm |
LM393PT Overview
A convenient packaging is provided in the form of 8-TSSOP (0.173, 4.40mm Width) .This comparator is of the CMOS, DTL, ECL, MOS, Open-Collector, TTL output type.Ready for shipping in Tape & Reel (TR) package.As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as General Purpose .Electronic comparator has a total of 2 elements.The device is equipped with 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.The comparator consists of 8 pins.You may wish to search LM393 for more solutions that address your specific needs.There is a quiescent current of 2.5mA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal use of the device should require a nominal supply current of 1mA .A current supply greater than 1mA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 250nA current into the device.Based on the voltage formula, the voltage gain of the part is 106.02dB .
LM393PT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393PT Applications
There are a lot of STMicroelectronics LM393PT linear comparators applications.
- Lithium ion battery monitoring
- Battery-Powered Electronics
- Infotainment & cluster
- Point of load regulators
- Current and voltage sensing
- Security Detection Systems
- Body Control Modules
- Wide Range VCO; MOS Clock Timers
- Zero-Crossing Detectors
- Power management