LM393PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Output Type | TTL |
| Power Supplies | 5/30V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Current - Output | 20mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Amplifier Type | COMPARATOR |
| Current - Input Bias | 250nA |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1V |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
LM393PWE4 Overview
The product is packaged in TSSOP to facilitate transportation.There is a comparator of type TTL output on this device.Ready for shipping in Rail/Tube package.There are 8 terminals on the comparator.The electrical component in this case belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.As a result, it contains 8 pins.8 pins are available on the comparator.A quiescent current of 2.5mA is observed in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normal use of the device should require a nominal supply current of 1mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1mA .The device can be operated with 5/30V power supplies.A voltage gain of 106.02dB can be determined from the voltage formula for the part.Comparator electronics is not recommended to maintain a temperature above 70°C .A temperature below 0°C is not suitable for the device.The maximal supply voltage of the comparator is 36V .This comparator allows minimum supply voltage of 2V .In order to maintain the quality of the output, 2 channels cooperate together.This comparator basically consists of a COMPARATOR amplifier with very high gain.Its output current is rated as 20mA .
LM393PWE4 Features
TTL output capability
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
COMPARATOR amplifier
LM393PWE4 Applications
There are a lot of Texas Instruments LM393PWE4 linear comparators applications.
- Notebooks and PDAs
- Appliances
- High-Speed Sampling Circuits
- Ultra-Low Power Systems
- Window Comparators
- Security Detection Systems
- Pulse, Squarewave, and Time Delay Generators
- Infotainment and Clusters
- Automotive
- Limit Comparators
