LM393PWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393PWG4 Overview
The product is packaged in 8-TSSOP (0.173, 4.40mm Width) to facilitate transportation.Output type of this comparator is CMOS, MOS, Open-Drain, TTL .The part is shipped by Tube .8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator families.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.When it comes to types, this comparator is a typical Differential .Currently, it consists of only 2 elements.Electronic comparator has 8 pins.In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .Electronic comparator has 8 pins.In order to find a solution that meets your specific needs, search LM393 for more pin-to-pin solutions.There is a quiescent current of 2.5mA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 1mA in order to use the device normally.Current supply exceeding 500μA could cause disfunction of the compartator.A power supply of 5V is sufficient for the operation of the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .Comparator electronics is necessary to have a voltage of 28V for normal operation.
LM393PWG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393PWG4 Applications
There are a lot of Texas Instruments LM393PWG4 linear comparators applications.
- Infotainment and Clusters
- Window Comparators
- Battery-Powered Electronics
- Wide Range VCO; MOS Clock Timers
- Wearable Devices
- Alarm and Monitoring Circuits
- Building automation
- Security Detection Systems
- General-Purpose Portable Devices
- System control and monitoring
