Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
8 |
Weight |
39.008944mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
LM393 |
Pin Count |
8 |
Output Type |
CMOS, MOS, Open-Drain, TTL |
Operating Supply Voltage |
9V |
Number of Elements |
2 |
Power Supplies |
5/30V |
Nominal Supply Current |
1mA |
Output Current |
20mA |
Max Supply Current |
1mA |
Quiescent Current |
2.5mA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.05μA |
Supply Voltage Limit-Max |
36V |
Dual Supply Voltage |
9V |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
5mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM393PWRG4 Overview
A convenient transport package is provided in 8-TSSOP (0.173, 4.40mm Width) .The comparator has a type CMOS, MOS, Open-Drain, TTL output.The part is shipped by Tape & Reel (TR) .The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator families.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.It's a typical Differential comparator.The total number of elements is 2 .There are 8 pins on this board.Electronic comparator is recommended that the mounting type be Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator is equipped with 8 pins.If you require more pin-to-pin solutions, search LM393 for more options.This comparator presents a quiescent current of 2.5mA .The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 1mA .If the current supply exceeds 1mA , the comparator might be damaged.There is sufficient power to run the device from 5/30V power supplies.According to the voltage formula, the part has a voltage gain of 106.02dB .The operating supply voltage for normal operation should be 9V .Often found in ADC circuits, this device is packed in TR .
LM393PWRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393PWRG4 Applications
There are a lot of Texas Instruments LM393PWRG4 linear comparators applications.
- Industrial
- Mobile Communications
- Hand-Held Electronics
- Metering Systems
- Window Comparators, Multivibrators
- Portable and Battery-Powered Systems
- High-Speed Differential Line Receiver
- Motor drives
- Automotive
- Mobile Phones