LM393TL/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFBGA |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 568mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 500μA |
| Power Dissipation | 568mW |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Propagation Delay | 700 ns |
| Quiescent Current | 2.5mA |
| Response Time | 1300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 675μm |
| Length | 2mm |
| Width | 1.3mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393TL/NOPB Overview
The product is packaged in 8-WFBGA in order to facilitate transportation.This comparator is of the CMOS, DTL, ECL, MOS, Open-Collector, TTL output type.This package has been designed with Tape & Reel (TR) .The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .When it comes to types, this comparator is a typical General Purpose .Electronic comparator has a total of 2 elements.There are 8 pins on this board.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 8 .Try search LM393 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 2.5mA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 500μA .An excess of current supply over 1mA could result in malfunction of the comparator.The device can be operated with 5V power supplies.Electronic comparator is possible to input a maximum of 250nA current into the device.Comparator electronics follows that the voltage gain of the part is 106.02dB .Normal operation requires 28V operating supply voltage.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LM393TL/NOPB Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393TL/NOPB Applications
There are a lot of Texas Instruments LM393TL/NOPB linear comparators applications.
- Appliances
- Wide Range VCO; MOS Clock Timers
- Handheld Instruments
- Window Comparators, Multivibrators
- Automotive
- Laptop Computers
- Window Comparators
- Body Control Modules
- Metering Systems
- Mobile Communications
