LM393TLX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFBGA |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 1mA |
| Power Dissipation | 568mW |
| Output Current | 16mA |
| Propagation Delay | 700 ns |
| Quiescent Current | 2.5mA |
| Response Time | 1300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 0.6mm |
| Length | 1.514mm |
| Width | 1.514mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
LM393TLX Overview
In order to make transportation easier, it is packaged in 8-WFBGA .There is a CMOS, DTL, ECL, MOS, Open-Collector, TTL output type for this comparator.The part will be shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as General Purpose .There are a total of 2 elements in it.As a result, it contains 8 pins.Surface Mount universial mout for easy adapting.To ensure proper functioning, the operating temperature should be set to 0°C~70°C .The comparator is equipped with 8 pins.You can search LM393 if you are looking for more pin-to-pin solutions.In this comparator, the quiescent current is 2.5mA .This component has a Surface Mount mount for mounting to PCBs or other boards.The nominal supply current of the device should be 1mA for normal use.There is a maximum current that can be input into the device of 250nA .The voltage formula shows that the part has a voltage gain of 106.02dB .
LM393TLX Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393TLX Applications
There are a lot of Texas Instruments LM393TLX linear comparators applications.
- DC/DC and AC/DC power supplies
- Point of load regulators
- Motor drives
- Factory automation & control
- Power Supervision
- Analog front end
- Multivibrators and High-Voltage Digital Logic Gates
- System control and monitoring
- Infotainment & cluster
- Mobile Phones
