LM393TLX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFBGA |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 568mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 500μA |
| Power Dissipation | 568mW |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Propagation Delay | 700 ns |
| Quiescent Current | 2.5mA |
| Response Time | 1300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 675μm |
| Length | 2mm |
| Width | 1.3mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393TLX/NOPB Overview
In order to make transportation easier, it is packaged in 8-WFBGA .There is a CMOS, DTL, ECL, MOS, Open-Collector, TTL output type for this comparator.This chip is designed with the Tape & Reel (TR) package.8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type General Purpose .There are a total of 2 elements in it.Electronic comparator has 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .The operating temperature should be set to 0°C~70°C to avoid mal-function.There are 8 pins on the comparator.Search LM393 to find more pin-to-pin solutions.A quiescent current of 2.5mA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 500μA in order to use the device normally.An excess of current supply over 1mA could result in malfunction of the comparator.The device can be operated with 5V power supplies.The maximal current your can input into the device is 250nA .The voltage gain of the part is indicated by 106.02dB in the voltage formula.Comparator electronics is acceptable to pack the device by TR .
LM393TLX/NOPB Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393TLX/NOPB Applications
There are a lot of Texas Instruments LM393TLX/NOPB linear comparators applications.
- Zero-Crossing Detectors
- High-Speed Differential Line Receiver
- Laptop Computers
- Consumer Medical Electronics
- Wearable Devices
- General-Purpose, Low-Voltage Applications
- Infotainment and Clusters
- Security Detection Systems
- Notebooks and PDAs
- Portable and Battery-Powered Systems
