LM393WDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Signature |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | TIN/TIN COPPER |
| Subcategory | Comparator |
| Max Power Dissipation | 450W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.475mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
LM393WDT Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, MOS, Open-Collector, TTL output type.The chip is packaged with Tape & Reel (TR) .The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Speaking of types, this is a typical General Purpose comparator.In total, it contains 2 elements.The board includes 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator consists of 8 pins.Search LM393 to find more pin-to-pin solutions.This comparator presents a quiescent current of 2.5mA .The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 1mA .If the current supply exceeds 1mA , the comparator could malfunction.There is sufficient power to run the device from 5V power supplies.Electronic comparator is possible to input a maximum of 250nA current into the device.In accordance with the voltage formula, the part's voltage gain is 106.02dB .The part belongs to the Signature series of comparator parts.
LM393WDT Features
CMOS, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393WDT Applications
There are a lot of ROHM Semiconductor LM393WDT linear comparators applications.
- Laptop Computers
- Mobile Communications
- Appliances
- Set Top Boxes
- Ultra-Low Power Systems
- Automatic Test Equipment
- Window Comparators
- Notebooks and PDAs
- RC Timers
- Wide Range VCO; MOS Clock Timers
