LM397MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM397 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Collector, TTL |
| Operating Supply Voltage | 30V |
| Number of Circuits | 1 |
| Nominal Supply Current | 700μA |
| Output Current | 13mA |
| Max Supply Current | 700μA |
| Propagation Delay | 940 μs |
| Quiescent Current | 2mA |
| Response Time | 940000 ns |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±2.5V~15V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 101.6dB |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2mA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 13mA @ 5V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM397MF Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .The comparator has a CMOS, Open-Collector, TTL output.Ready for shipping in Tape & Reel (TR) package.Electronic comparator is possible to find the 5 terminals of the comparator.The electrical component in this case belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator is possible to classify the chip as General Purpose .The device contains 5 pins.The recommended mounting method is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .5 pins are present on the comparator.Alternatively, you may search for LM397 to find more pin-to-pin solutions for your specific needs.This comparator presents a quiescent current of 2mA .The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires 700μA supply current.If the current supply exceeds 700μA , the comparator could malfunction.Electronic comparator is possible to input up to 250nA current into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 101.6dB .A normal operation requires a voltage of 30V .Often found in ADC circuits, this device is packed in TR .
LM397MF Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 2mA
Voltage Gain: 101.6dB
LM397MF Applications
There are a lot of Texas Instruments LM397MF linear comparators applications.
- Threshold Detectors
- Multivibrators and High-Voltage Digital Logic Gates
- Consumer Medical Electronics
- Infotainment and Clusters
- Power Supervision
- Alarm and Monitoring Circuits
- General-Purpose Portable Devices
- General Purpose Low Voltage Applications
- Notebooks and PDAs
- RC Timers
