LM4250CN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LM4250 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 100μA |
| Nominal Supply Current | 8μA |
| Power Dissipation | 500mW |
| Output Current | 12mA |
| Max Supply Current | 100μA |
| Slew Rate | 0.2 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 75nA |
| Voltage - Supply, Single/Dual (±) | ±1V~18V |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 120 kHz |
| Gain Bandwidth Product | 250kHz |
| Neg Supply Voltage-Nom (Vsup) | -1.5V |
| Unity Gain BW-Nom | 250 kHz |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Gain | 0.25 dB |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.075μA |
| Programmable Power | YES |
| Dual Supply Voltage | 15V |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM4250CN Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. The case in which buffer amplifier is delivered is called a Tube case. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 1.5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 8-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 6mV voltage. For this electrical component, the recommended mounting type is Through Hole, which is the most common. With regard to operating temperature, this op amp functions well at 0°C~70°C. Using an 100μA supply current, this operational amplifier ics can be operated. The op amp ic has 1 channels on it. The instrumentation amplifier is packed in the form of RAIL.
LM4250CN Features
8 Pins
supply voltage of 1.5V
LM4250CN Applications
There are a lot of Texas Instruments LM4250CN Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Logarithmic operation circuits
- Voltage regulation circuit
- pH (acidity)
- Portable docking station
- Measurements of Wheatstone bridge
- Band-stop filter
- Strain gauges
- Digital cameras
- Gaming industry
