LM4550BVH
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Audio, AC '97 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Other Consumer ICs |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM4550 |
| Pin Count | 48 |
| Power Supplies | 3.3/55V |
| Number of Channels | 6 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Number of Bits | 18 |
| Data Interface | Serial |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 4.2V~5.5V |
| Voltage - Supply, Digital | 3V~5.5V |
| Power Consumption | 280mW |
| Signal to Noise Ratio (SNR) | 90 dB |
| Resolution (Bits) | 18 b |
| Number of DAC Channels | 2 |
| Number of Analog Inputs | 7 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 90 / 89 |
| Number of Analog Outputs | 4 |
| Height | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM4550BVH Overview
In order to save space, it is packaged in the 48-LQFP package. Packaging is done in the form of a Tray. Due to the fact that this part is of the type Audio, AC '97, it is capable of delivering high-efficiency performance in a wide range of applications. The mounting type is Surface Mount. A performance setting of -40°C~85°C allows it to operate normally. It features 2 / 2 ADCs / DACs. The analog circuit is provided with the supply voltage of 4.2V~5.5V. A supply voltage of 3V~5.5V is applied to the digital circuit. In order to avoid reflections off the end of the transmission line, 48 terminations are used. In terms of electronics, it is a 48-pin device. With 48 pins, it is configured. More related parts can be found by using its base part number LM4550. An integrated circuit is mounted on a PCB based on the technology of Surface Mount. The maximum value of supply voltage should be maintained at 5.5V. This electronic part is classified into the subcategory of Other Consumer ICs. Maintaining a minimum voltage of 3V is recommended. Power supplies of 3.3/55V are used to operate it. There are 6 channels for transmitting data on it. The storage of information is provided by 18 bits. There are 7 analog inputs on the device. There are 4 analog outputs on this device. There are 2 DAC channels that can sample analog outputs from numerical values.
LM4550BVH Features
Embedded in the 48-LQFP package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
7 analog inputs
4 analog outputs
LM4550BVH Applications
There are a lot of Texas Instruments LM4550BVH CODECs Interface ICs applications.
- Robotic arm positioning
- Converting
- Ships navigation
- Demultiplexing
- Automation
- Code conversion
- Applications involving measuring wheels
- Multiplication
- Printing
- Mobile equipement
