LM4562NA/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 113.398093g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | LM4562 |
| Pin Count | 8 |
| Operating Supply Voltage | 17V |
| Number of Channels | 2 |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 10mA |
| Output Current | 26mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~17V |
| Output Current per Channel | 26mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 10MHz |
| Gain Bandwidth Product | 55MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 55000 kHz |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.065μA |
| Load Impedance | 2kOhm |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM4562NA/NOPB Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Audio-types. In the case of Tube cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 100μV. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. This op amp can operate from a supply current at 10mA. You should keep the voltage gain at 140dB for the time being. Instrumentation amplifier has 2 channels on it. The operating supply voltage of instrumentation amplifier is rated 17V voltage.
LM4562NA/NOPB Features
8 Pins
supply voltage of 15V
140dB voltage gain
LM4562NA/NOPB Applications
There are a lot of Texas Instruments LM4562NA/NOPB Instrumentational OP Amps applications.
- Gaming industry
- High/low-pass filter circuit
- Multimedia playback equipment
- Test and measurement instruments
- Radiation thermometry transducers
- Differentiator circuits
- Oscilloscopes
- Power generator
- E-book readers
- Fission chambers
