LM4667MM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Boomer® |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, Short-Circuit Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM4667 |
| Pin Count | 10 |
| Output Type | 1-Channel (Mono) |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Nominal Supply Current | 9mA |
| Output Power | 1.3W |
| Common Mode Rejection Ratio | 41 dB |
| Supply Type | Single |
| Voltage Gain | 12dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Max Output Power | 1.3W |
| Max Output Power x Channels @ Load | 1.3W x 1 @ 8 Ω |
| Harmonic Distortion | 2% |
| Load Impedance | 8Ohm |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM4667MM/NOPB Overview
This package is embedded in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .Chips should be packaged in Tape & Reel (TR) cases.In addition, 10 terminations are used, which entail the termination of a transmission line with a device whose characteristic impedance matches the line's.Amp parts is configured wAmp partsh an output of 1-Channel (Mono) .The device is of type Class D .The 10 pins are pronged contacts which are part of a signal interface in a computer or other communication device.There is an electronic part mounted in the way of Surface Mount .This electrical device has a 2.7V~5.5V supply voltage.There are 1 channels available on the device.During operation, the value Depop, Differential Inputs, Short-Circuit Protection, Shutdown can be ensured.Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.A total of 10 pins are present in it.Amp parts is part of Audio/Video Amplifiers .The LM4667 family includes it.Amp parts is mounted in the way of Surface Mount .As of this moment, the maximum Output Power of this electronic part is 1.3W kWh per hour.For normal operation, the supply voltage (Vsup) should be kept above 2.7V .There is a supply type of Single for this electronic part.The series Boomer? contains it.
LM4667MM/NOPB Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
10 pin count
LM4667 family
1.3W kWh per hour
Boomer? series
LM4667MM/NOPB Applications
There are a lot of Texas Instruments LM4667MM/NOPB audio amplifiers applications.
- Biopotential
- Inverse/same-phase proportional circuit
- Power control
- Addition and subtraction operation circuits
- ECG equipment
- Portable electronic products powered by batteries
- High speed sample
- Fast A/D and D/A converters, video amplifiers
- Test and measurement instruments
- Broadcasting
