LM4670SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Boomer® |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, Short-Circuit Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class D |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.4V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM4670 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Number of Channels | 1 |
| Nominal Supply Current | 4.8mA |
| Output Power | 3W |
| Common Mode Rejection Ratio | 80 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Gain Bandwidth Product | 35 kHz |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Max Output Power | 3W |
| Max Output Power x Channels @ Load | 3W x 1 @ 4 Ω |
| Harmonic Distortion | 10% |
| Load Impedance | 4Ohm |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM4670SD/NOPB Overview
The device is embedded in 8-WFDFN Exposed Pad .This device is packaged in the way of Tape & Reel (TR) .Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 8 termination.1-Channel (Mono) is used for its output.This electrical device is classified as type Class D .In a computer or other communication device, there are two pronged contacts called 8 pins.Amp parts is mounted in the way of Surface Mount .Electrical devices like this one have a 2.4V~5.5V supply voltage.This device is equipped with a total of 1 channels.The operation of Depop, Differential Inputs, Short-Circuit Protection, Shutdown can be ensured.A maximum operating temperature of -40°C~85°C TA should be maintained.There are 8 pins on this device.This chip belongs to Audio/Video Amplifiers .This is a member of the LM4670 family.In this case, the electronic part is mounted in the way of Surface Mount .As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 3W kWh per hour.A normal operation requires a supply voltage (Vsup) above 2.4V .Single is the type of supply for this electronic part.Amp parts is a member of the Boomer? series of electronic parts.
LM4670SD/NOPB Features
8-WFDFN Exposed Pad package
8 pin count
LM4670 family
3W kWh per hour
Boomer? series
LM4670SD/NOPB Applications
There are a lot of Texas Instruments LM4670SD/NOPB audio amplifiers applications.
- Addition and subtraction operation circuits
- High/low-pass filter circuit
- Scintillation detectors
- Automotive sensors
- Information processing
- Oscilloscopes
- Semiconductor detectors
- Television broadcasting equipment
- Power generator
- Signal transformation
