LM4673TM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-WFBGA |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Boomer®, PowerWise® |
| JESD-609 Code | e1 |
| Feature | Depop, Differential Inputs, PWM, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | Class D |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.4V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.4mm |
| Base Part Number | LM4673 |
| Output Type | 1-Channel (Mono) |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.6mA |
| Quiescent Current | 2.6mA |
| Output Power | 2.65W |
| Common Mode Rejection Ratio | 70 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Max Output Power | 2.65W |
| Max Output Power x Channels @ Load | 2.65W x 1 @ 4 Ω |
| Harmonic Distortion | 10% |
| Load Impedance | 4Ohm |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM4673TM/NOPB Overview
The device is embedded in 9-WFBGA .The device is in the form of Tape & Reel (TR) .Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 9 termination.The output it is configured with uses 1-Channel (Mono) .Amp parts is an electrical device of type Class D .As part of the signal interface in a computer or other communication device, there are 9 pins.The electronic component is mounted in the way of Surface Mount .Amp parts is powered by a voltage of 2.4V~5.5V volts.There are no channels on the device.The operation of Depop, Differential Inputs, PWM, Short-Circuit and Thermal Protection, Shutdown can be ensured.Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.The item belongs to Audio/Video Amplifiers .Amp parts is included in the LM4673 family.Amp parts is recommended to mount the chip in the way of Surface Mount .In this electronic part, the output power is a maximum of 2.65W kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 2.4V .Amp parts is a Single supply type.Amp parts is a part of the Boomer?, PowerWise? series.Despite external influences, it consumes 2.6mA of quiescent current.
LM4673TM/NOPB Features
9-WFBGA package
LM4673 family
2.65W kWh per hour
Boomer?, PowerWise? series
LM4673TM/NOPB Applications
There are a lot of Texas Instruments LM4673TM/NOPB audio amplifiers applications.
- Power generator
- Information processing
- Signal operation
- Proportional operation circuits
- Oscilloscopes
- Multiplication and division circuits
- Radar
- Proportional counter tubes
- Biopotential
- Broadcasting
